JLG 15SP Operator Manual - Manual (Page 52)

SECTION 4 - MACHINE OPERATION
4-18 – JLG Lift – 3120774
Hanging a Rug using the Rug Carrier Accessory
Arms
The following is a description for use of the Rug Carrier accessory
in hanging rugs on horizontal pivoting arm display racks.
1. Select the intended location in the display for mounting the
rug. Open the display rack to provide adequate space for the
lift and rug.
2. With the Rug Carrier Accessory arms stowed, drive the lift
into position prior to loading the rug.
3. Swing and lock Rug Carrier Accessory arms into the carry
position.
4. Load the rolled rug with the finished side facing the platform.
As required, use an assistant to load the rug onto the Rug
Carrier Accessory arms.
5. Make sure that the rug is centered over its length on the Rug
Carrier Accessory.
6. Elevate the platform to the required height for mounting the
rug onto the display arm.
7. Properly attach the rug to the display arm. Never climb onto
the platform rails for any reason.
8. After adequately attaching the rug to the display arm, lower
the platform, stow the Rug Carrier Accessory arms.
9. As required reposition and elevate the lift to completely
attach the rug.
Positioning Rug Carrier Arms
1. Carry Position
2. Stowed Position and Lock
into Position
3. Lift Arm Up, Swing
3
2
1