Section 5. optional equipment, 1 optional equipment, Extra power pack (dc battery, charger & case) – JLG 15SP Operator Manual User Manual

Page 55: Lifting hook, Platform auxiliary power lowering device, Amber beacon light, Platform motion alarm, Foot-operated platform controller, Rug carrier accessory, Section - 5 - optional equipment

Advertising
background image

SECTION 5 - OPTIONAL EQUIPMENT

3120774

– JLG Lift –

5-1

SECTION 5. OPTIONAL EQUIPMENT

5.1 OPTIONAL EQUIPMENT

The following optional equipment is available for SP machines:

Extra Power Pack

(DC Battery, Charger & Case)

An extra power pack which includes the battery, charger and
molded case allows for extended use of an AM machine under
high cycle conditions. One power pack can be charging while
the other is in use.

Lifting Hook

The optional lifting hook is mounted at the top rear of the first
mast section. The hook is used to lift the machine up or down to
another level.

Platform Auxiliary Power Lowering Device

The Platform Auxiliary Power Lowering device is a switch acti-
vated, battery backed electrical circuit, designed to provide
power to lower the platform in the event of loss of machine main
power. This can be useful to the operator if the main battery
becomes depleted while the platform is raised. Also if the on/off
key switch on the ground control station is turned to the off posi-
tion while the platform is still raised.

Amber Beacon Light

The revolving amber beacon flashes any time the machine power
is turned on, this helps alert others of the presence and operation
of the machine.

Platform Motion Alarm

The motion alarm emits a very audible beeping sound which is
activated anytime the platform is in motion (ascending or
descending).

Foot-Operated Platform Controller

This device is mounted on the platform floor at the rear of the plat-
form. It contains two separate petal switches mounted in a protec-
tive housing. The switches labeled UP and DOWN allow the
operator to operate the lift up and lift down functions with either
foot, while pressing the function enable button on the platform
control panel.

Rug Carrier Accessory

The rug carrier accessory is intended for use in hanging and
removal of rugs in hanging display racks. The rug carrier acces-
sory consists of two pivoting arms mounted to the platform left
side rails.

Advertising
This manual is related to the following products: