Machine cycle counter meter, Platform gate alarm – JLG 15SP Operator Manual User Manual
Page 56
Advertising

SECTION 5 - OPTIONAL EQUIPMENT
5-2
– JLG Lift –
3120774
Machine Cycle Counter Meter
The Cycle Counter Meter is located on the Ground Control Sta-
tion. This meter tracks the number of cycles the mast travels up
and down during macheine operation. This information can be
used to determine maintenance intervals and other for other infor-
mational purposes when recorded over a specific period of time.
Platform Gate Alarm
The platform gate alarm is available for machines equipped with
the side-entry/material-tray platform with swinging gates. The gate
alarm sounds if either or both gates are opened once the platform
is raised approximately 2 in. from the fully lowered position.
Advertising
This manual is related to the following products: