JLG M600 Parts Manual - Manual (Page 133)

3121814 E600/E600J E600JP M600/M600J M600JP 4-7
SECTION 4 PLATFORM
FIGURE 4-2. PLATFORM INSTALLATIONS (SIDE ENTRY)
ITEM # PART NUMBER QTY. DESCRIPTION REV.
Ref PLATFORM INSTALLATION WITH GATE
Use 1001144025 Ref 6ft (1.83m) with No Mesh (was p/n 3510832) B/L
Use 1001144027 Ref 4ft (1.22m) with No Mesh (was p/n 3510830) B/M
Ref Note: Platform and Mesh must be ordered separately for
Platforms with Mesh. See SPECIAL OPTIONS SECTION for
Mesh Installations.
Ref Note: Replacement decals must be ordered separately -
See DECAL SECTION.
1 Not Used
2 2080040 16 Fastener, Huck
3 2600281 2 Hinge, Self Closing
4 2940074 1 Latch
5 3311001 4 Nut #10-24NC (Prior to SN 0300077423)
6 See Note 1 Platform Weldment (Note: Purchase Platform Assembly)
7 3520072 1 Plug
8 4 Hardware Options:
3900205 Screw (Prior to SN 0300077423)
3820020 Rivet, Pop (SN 0300077423 to Present)
9 4751000 4 Flatwasher #10 Regular (Prior to SN 0300077423)
10 4761000 4 Lockwasher #10 (Prior to SN 0300077423)
11 1 Gate Weldment Options:
4846452 Gate for Platform p/ns 3510830 & 3510832
1001144629 Gate for Platform p/ns 1001144025 & 1001144027
12 3520198 2 Plug
13 0100011 AR Locking, Compound (Prior to SN 0300077423)
Ref PLATFORM ASSEMBLY WITH DROP-BAR
Use 1001144018 Ref 6ft (1.83m) (was p/n 1001138431) B/B
Use 1001144020 Ref 4ft (1.22m) (was p/n 1001138433) B/B
51 0100011 AR Compound, Locking
52 0641418 2 Bolt 1/4in-20NC x 2-1/4in
53 0961845 2 Bushing
54 3290606 2 Nut M6
55 3300151 2 Nut, Acorn
56 See Note 1 Platform Weldment (Note: Purchase Platform Assembly)
57 3520198 2 Cap-Plug
58 4010618 2 Screw M6 x 50mm
59 4711400 4 Flatwasher 1/4in
60 4811700 2 Flatwasher M6
61 1001138494 1 Bar, Drop
62 1001138514 1 Rail (Top)
63 1001140429 1 Decal - Drop-Bar