JLG 2658E Parts Manual - Manual (Page 155)

3120847 1532E/1932E/2033E/2046E/2646E/2658E 4-37
SECTION 4 PLATFORM
S
E
C
T
I
O
N
4
P
L
A
T
F
O
R
M
FIGURE 4-8. CONTROLLER ASSEMBLY - PQ
FIG & ITEM # PART NUMBER DESCRIPTION QTY. REV.
CONTROLLER ASSEMBLY - PQ Ref.
1600266 Prior to S/N 43888 Ref. -
1600276 S/N 43888 to Present Ref. B
7011978 Handle Assembly 1
1 7011979 Mechanism, Handle 1
2 7020516 Slidelock Assembly (Was p/n 7011933) 1
3 7020519 Boot (Was p/n 7003772) 1
4 7011934 Spring, Compression 1
5 7011935 Handle Grip Assembly 1
7011976 Handle Halves 2
5A 7020536 Screw #6-32NC x 1 1
7011972 Lockwasher 1
7011970 Nut 1
5B 7011971 Screw 2
7011972 Lockwasher 2
7011970 Nut 2
6 7003789 Microswitch Assembly (Includes (2) switches, (1)
separator and the wiring.) 1
7020500 Microswitch 2
7 7003790 Cap, Rubber 1
8 7003791 Actuator, Switch 1
9 Not Used
10 4460265 Connector 1
4460267 Pin, Male A/R
11 7011980 Electrical Assembly 1
7011925 Potentiometer 1
12 7003771 Switch 2
Note:
- 1600266 Controller has microswitch located on
right side of cam.
- 1600276 Controller has microswitch located on
left side of cam.
- 7011980 Electrical Assembly has microswitch
located on left side of cam. When replacing Electri-
cal Assembly, use part number 7011980 for both
1600266 and both 1600266 and 1600276 controllers.