JLG 9MP Parts Manual - Manual (Page 25)

3121164 9MP 2-13
SECTION 2 CONTROLS
FIGURE 2-5. PLATFORM CABLE AND CONTROLS INSTALLATION
ITEM # PART NUMBER QTY. DESCRIPTION REV.
0272603 Ref. PLATFORM CONTROLS AND CABLES INSTALLATIONS B
1 0100011 A/R Loctite #242 (Not Shown)
2 Not Used
3 0861207 1 Control Box Assembly E
3A 7020078 1 Switch, Push-Pull (Red)
3B 7020088 2 Switch, Push Button (White)
3C 7020089 1 Switch, Push Button (Green)
3D 7020091 1 Plug
3E Use 7027299 1 Connector, Strain Relief (Prior to S/N 22598 was p/n 7020092)
3F 7020093 4 Screw M3 x 25 Freedrive
4 1320149 2 Clamp
5 Not Used
6 3574039 1 Plate, Decal
7 3580231 1 Pulley, Sheave
8 3820032 4 Rivet
9 3900200 1 Screw, Shoulder
10 4160130 1 Spring, Extension
11 4460566 1 Connector, 90° Strain Relief
12 Not Used
13 4751000 4 Flatwasher #10
14 4751500 1 Flatwasher 5/16”
15 4922420 1 Harness, Platform Control
3990010 1 Diode 6 Amp
16 4922799 1 Harness, Mast Cable
17 0791410 2 Screw 1/4”-20NC x 1 1/4”
18 3311408 1 Nut, Flanged 1/4”-20NC
Ref. ACCESSORY OUTLET INSTALLATION (OPTIONAL)
0273943 Ref. 110V/120V (ANSI Spec) B
0272516 Ref. 220V/240V (ANSI Spec) B
0272518 Ref. 220V/240V (ANSI Export Spec) B
101 0100011 A/R Loctite #242 (Not Shown)
102 0721006 2 Screw, Countersunk Hex #10-24NC x 3/4”
103 1 Box, Receptacle Options:
0860946 ANSI Spec
Not Available ANSI Export Spec (Supply Locally)
104 4923110 1 Cable, Electrical - 12/3
105 2 Decal Options:
3252761 120V AC
3252760 220V - 240V AC
106 3311001 2 Nut #10-24
107 to 108 Not Used
109 1 Cover, Receptacle Options:
4060092 120V ANSI Spec
4060092 240V ANSI Spec
Not Available ANSI Export Spec (Supply Locally)
110 4460023 1 Connector, Strain Relief