I.R.I.S. Readiris 14 for Windows User Guide User Manual
Page 39
Advertising
Readiris
TM
14 – User Guide
43
Step 2: Select your scanner (Note: if you selected image files in
the previous step, proceed to Step 3)
If you already configured your scanner, your scanner model is
displayed here. If it is not, the Scanner Model list is displayed.
Select your exact same Scanner Model, then click Configure to
configure the driver.
For more information on how to configure the scanner, see
Configuring your scanner. For more information about the
scanner settings, see the topic Selecting the Scanner Settings.
Figure Step 2
Advertising