I.R.I.S. Readiris Corporate 12 for Mac Quick Start - Manual (Page 2)

This Quick Start Guide provides general guidelines for installing and using Readiris™ Pro 12
and Readiris™ Corporate 12. For detailed instructions on the full range of functionalities of
Readiris™, see the complete User Guide on the Readiris™ CD-ROM.
Installation
Log on to your Mac operating system as administrator or make sure you have the necessary
•
administration rights to install the software.
Connect your scanner to your Mac and install the drivers and/or software delivered with
•
your scanner. Test your scanner. If you experience any problems, contact your scanner
manufacturer.
Insert the Readiris™ CD-ROM in the CD-ROM drive. Double-click the CD-ROM icon on the
•
Desktop, then launch the installer. Follow the on-screen instructions.
How to run Readiris™
Click the
•
Readiris™ icon on the Dock to open Readiris™.
How to configure your scanner
Before you can use Readiris™, you must configure your scanner:
Click
•
Preferences on the Readiris™ menu.
Select you scanner from the list, then select the scanner options.
•
(A resolution of 300 dpi is
recommended.)
If you are using an Image Capture scanner, make sure you select the option
•
Enable Image
Capture Scanners.
Note: if the correct scanner driver isn’t installed, the scanner list will not be available.
How to use Readiris™
2 - Quick Start Guide
RIMac12-qug-intl.indd 1 29/07/09 14:14:05