I.R.I.S. IScan Book 2 - Manual (Page 2)

2/6 Getting Started – English
USING THE SCANNER
STEP 1: Choose the scanner settings
a. Press the Scan button for 2 seconds to power on the scanner.
b. Press the C/BW button to choose between color and mono (black‐and‐white) scanning.
c. Press the DPI button to choose between a high (600 dpi) or low (300 dpi) resolution.
STEP 2: Scan your documents
a. Place your scanner at the top of the page you want to scan.
Tip: Make sure the IRIScan TM Book is still powered on.
b. Press the Scan button. The scan led lights up green.
c. Slide the scanner slowly and steadily over the page.
Tip: Hold the document steady with one hand while scanning.
d. To stop scanning, click the Scan button again.
If the ERR. led lights up red a scan error occurred. See Troubleshooting information on page 6.