I.R.I.S. IRIScan Pro 3 Wi-Fi User Guide - Manual (Page 32)

User Guide
3-7
3.8.1 Connect With Windows XP or Later
1. Turn on the scanner.
2. Insert the memory card containing your scanned images into the scanner’s memory
card slot. Skip this step if images are stored on the built-in disk.
3. Connect the included USB cable to the scanner and to your computer.
4. Your computer should recognize the card or the scanner as a Removable Disk (IRIScan
Pro Wifi).
5. Click the Removable Disk and you will find a folder of “DCIM” is created and all the PDF
files will be stored in the subfolder of “200DOC” and the JPEG files in the subfolder of
“100PHOTO”. File name starts from IMG_0001.pdf or IMG_0001.jpg.
3.8.2 Connect With Macintosh Computer
When the computer recognizes the scanner built-in disk or inserted memory card, the
volume icon appears on the desktop.
To view the contents of the built-in disk or memory card, double-click the icon to open a
Finders window.
3.8.3 Access Your Scanned Images
Each scanned image is given a file name with the prefix IMG_ followed by a 4-digit
sequential number in the order the images are stored. For example, IMG_0001.jpg,
IMG_0002.jpg, IMG_0001.pdf, IMG_0002.pdf, etc.
JPG files are stored in a sub folder titled DCIM\100PHOTO. The folder stores 9999 photo
files, and then automatically creates another sub folder titled 101PHOTO, and so on to
199PHOTO.
PDF files are stored in a sub folder titled DCIM\200DOC. The folder stores 9999 document
files, and then automatically creates another sub folder titled 201DOC, and so on to
299DOC.
3.8.4 Load Scanned Images in Readiris and Cardiris
When using the scanner in Easy SD mode you can load your scanned images from the
memory card or built-in disk directly in Readiris and Cardiris.
Note that in Windows you can also use Readiris and Cardiris to scan documents directly in
Advanced PC mode. See the sections 4.2 and 4.3 for more information.
Readiris Corporate 14 (Windows)
1. Start Readiris.
When you start Readiris for the first time you are asked to activate it. Click Yes and
enter the Activation code you find on the label inside the DVD box. Then click OK.
Note that an internet connection is required to do the activation.