I.R.I.S. IRISPen Express 6 for Mac - Manual (Page 25)

C HAPTER 4 - B ASIC PARAMETERS
21
• If you have selected Clipboard as output target, you have access
to the following advanced options via the button Choose the
output target in the IRISPen Palette or the command Options
from the Settings menu. Select the required options and values,
then click on OK to confirm.
Include font and size
You can determine the font and the size of the data to be inserted
in the active application. Tick the button Include font and size
and select the required font and size via the arrows on the right.
Paste automatically (default value)
If this option is selected, the software automatically pastes the
data that has been sent to the clipboard in the active application.
Otherwise, you must paste the data manually with the Paste or
CTRL+V command.
P ROGRAMMING THE PEN BUTTONS ( SINGLE AND
DOUBLE CLICK )
Your pen scanner is equipped with two buttons. The simple and
double click of each pen button can be programmed so as to
execute an operation in the target application. By simply
pressing the pen buttons, you will thus be able to execute key