Bissell PROHEAT2X 20B4 - Manual (Page 13)

w w w . b i s s e l l . c o m 8 0 0 . 2 3 7 . 7 6 9 1
13
O
perations
Cleaning with attachments
Your ProHeat 2X machine comes
equipped with a hose and at least
one attachment for cleaning stairs,
upholstery, and more.
1. Important! if using to clean uphol-
stery, check upholstery tags.
A. check manufacturer’s tag before clean-
ing. “W” or “WS” on the tag means
you can use your ProHeat 2X. if the tag
is coded with an “X” or an “S” (with a
diagonal stripe through it), or says “dry
clean Only”, do not proceed with any
deep cleaning machine. do not use
on velvet or silk. if manufacturer’s tag is
missing or not coded, check with your
furniture dealer.
B. check for colorfastness in an incon-
spicuous place.
C. if possible, check upholstery stuffing.
colored stuffing may bleed through
fabric when wet.
D. Plan activities to allow upholstery
time to dry.
E. Vacuum thoroughly to pick up loose
debris and pet hair. use a vacuum
with a brush attachment and a crevice
tool to clean in fabric folds.
2. follow the instructions on page 10 for filling
the 2-in-1 water tank and the formula tank.
3. Set Readytools dial to the "tOOlS"
setting. this will allow spray and suction
from the hose.
4. Set custom clean dial for heavy traffic,
normal clean, light clean, or water rinse
as desired.
5. Attach the cleaning tool to the end of the hose.
6. Plug in and turn on the power switch and
heater (if desired).
7. clean by pressing the trigger to spray
solution onto the area to be cleaned.
Slowly move the tool back and forth over
the soiled surface. Release the trigger to
suction soiled water. continue to clean in
the area, working in small sections, until no
more dirt can be removed. Rinse (optional)
and suction as needed.
Caution: Do no overwet.
Adsdfdd ghg bvh cvbbj jkn hnbj
jkvh
gcghhjj jhffhl k
llgh
Manufacturer’s tag
5.
WARNING:
to reduce the
risk of injury, be extra careful when
cleaning stairs. make sure machine is
secure and level.