BURY UNI Take&Talk universal - Manual (Page 15)

13
Operating guidelines
9. Establishing a Bluetooth connection
If you wish to establish a Bluetooth connection for the first time, you have to activate the Bluetooth
function of your mobile phone and search for Bluetooth devices. In this case search for a device labelled
„T&T universal ...”. If several devices were identified, please select the Take&Talk universal and enter the
PIN number 1234. The Bluetooth connection (pairing) will then be established between your smart-
phone and the Take&Talk universal.
In the event of a successful connection with the cradle, a corresponding message will appear in the
display of the smartphone. If it is not possible to establish a connection, please check and update the
software release of your smartphone. An overview dealing with this subject can be found on the Inter-
net at www.bury.com. If you have questions with regard to the menu navigation, functions and opera-
tion of your smartphone, please refer to the operating guidelines of your smartphone. Depending on
the manufacturer and type, this considerably differs from each other.
Note:
If the rechargeable battery of the smartphone is low, it is sometimes not possible to X
establish a
Bluetooth connection.
If you wish to cancel a Bluetooth connection, you can either disconnect it conveniently at the Take&Talk
universal or at your smartphone. In addition, the connection is disconnected, if you move too far away
from the vehicle while taking your smartphone with you and thus leave the reception radius of the
Take&Talk universal.
Note:
If the vehicle’s power supply system is switched off then the current X Bluetooth connec-
tion is automatically interrupted. If a telephone call is made in the interim time then the
connection will continue until the telephone call is concluded.
The Bluetooth connection is automatically re-established only if you re-enter the reception area of
the Take&Talk universal (approx. 10 metres) and if you want to perform or receive a phone call. Excep-
tions here to are some smartphones which only re-establish the Bluetooth connection after the
confirmation of a message.
Thanks to the Multipoint Function you are able to connect two mobile phones at the same time with
the Take&Talk universal via
Bluetooth. You operate this function with the plus button on the cradle.
The mobile phone connected most recently is given priority which means all of the functions described
in the table (on page 15 of this guide) refer to this telephone.