Echo CH4400 Instruction v.2 - Manual

Instruction Sheet
Instructions
PN 77653-00
Rev. 042613
SUBJECT: CH4400 BELT GUIDE IN-
STALLATION, PN 77654-00
FITS MODELS: CH4400 - VIN
5VJAA001XDW003870 and below
Before inspecting or servicing any part of this machine,
shut off or disconnect power source and make sure all
moving parts have come to a complete stop.
WARNING
PURPOSE
This kit is to replace the existing one piece belt guide with
two separate belt guides. The two belt guides will offer lon-
ger belt life. To replace the belt guides proceed as follows.
BELT GUIDE INSTALLATION
1. Remove seven 5/16" bolts and side belt cover.
2. Remove four 5/16" bolts and top belt cover.
3. Remove the two 5/16" bolts and belt guide and dis-
card. DO NOT reuse hardware.
4. Engage belt engagement lever to apply tension to belt.
5. Install new belt guides using hardware included.