Echo 76624 Owners Manual v.3 - Manual (Page 12)

10 6 INCH CHIPPER
ASSEMBLY
2.7 check hYdraulic fluid level 2.8 check coolanT (diesel onlY)
you may need to add coolant before you start the diesel
engine. While operating, make sure the fluid is between
the full and the low marks, add if necessary.
Refer to kubota engine manual for coolant information
and maintenance.
The machine was shipped with fluid, as it was tested at
the factory. However, check the fluid levels before initial
operation and add if necessary. to check the level, locate
the hydraulic fluid tank, which is located underneath the
rotor housing. there is a dipstick located on the tank cap.
If necessary add fluid.
Premium hydraulic fluids containing high quality rust,
oxidation and foam inhibitors are required. these include
premium turbine oils, aPI Cd engine oils per Sae j183,
M2C33F or G automatic transmission fluids meeting Allison
C-3 or Caterpillar to-2, and certain specialty agricultural
tractor fluids.
Hydraulic
Tank Cap
Hydraulic fuel tank cap
Coolant tank
2.9 check moTor oil level
the machine was shipped with oil in the engine, as it was
tested at the factory. to determine which type of oil to use,
refer to the engine owners manual included in the owners
kit of the chipper.
Remove the oil fill plug.
Checking as necessary, add oil to the motor until the
dipstick shows the correct reading.
1.
2.