Echo 74824 Owners Manual v.3 - Manual (Page 13)

Page 11 6" & 8" Bear Cat Chipper Operator’s Manual
For engine controls and maintenance please refer to the
engine owner's manual included with the machine.
1. Engine Fuel Tank: Use unleaded fuel. Do not mix with
oil.
2. Trailer Hitch: Always use 2 inch ball and safety chains.
3. Jack Stand: Always have in UP position and clear from
ground when moving. When in use, place in DOWN
position on a level surface.
4. Engine Drive Belts and Shield: Never remove shields
when in use.
5. Chipper Chute: Feed materials to be chipped through
the chute.
6. Rotor Access Cover: Used to remove chipper blades
and check nuts for proper torque.
7. Engine Battery: (see section 2.7)
8. Foot Clutch Pedal: Used to disengage rotor assembly
drive belt.
9. Adjustable Chipping Anvil: Check nuts for 75 Ft-lb.
torque every 8 hours.
3.1 MACHINE CONTROLS
Figure 3.1 - Chipper Control Locations
S e c t i o n
Controls
3