Brother MFC 6890CDW - Manual (Page 52)

Sending a Fax
43
5
Broadcasting
(Monochrome only)
5
Broadcasting is when the same fax message
is automatically sent to more than one fax
number. You can include Groups,
One Touch, Speed Dial numbers and up to
50 manually dialled numbers in the same
broadcast.
After the broadcast is finished, a Broadcast
Report will be printed.
a
Press (Fax).
b
Load your document.
c
Press d or c to display Broadcasting.
d
Press Broadcasting.
e
You can add numbers to the broadcast
in the following ways:
Press Add Number and enter a
number using the buttons on the
LCD.
Press OK.
Press Phone Book.
Press
to search by
Alphabetical Order or
Numerical Order. Press the entries
that you want to add to the
broadcast.
Press OK.
Note
One Touch Dial locations begin with l.
Speed Dial locations begin with #.
f
After you have entered all the fax
numbers by repeating step e, press OK.
g
Press Mono Start.
Note
• If you did not use up any of the numbers
for Groups, you can ‘broadcast’ faxes to
as many as 256 different numbers.
• The available memory will vary depending
on the types of jobs in the memory and the
number of locations used for
broadcasting. If you broadcast to the
maximum numbers available, you will not
be able to use dual access and delayed
fax.
• If the memory is full, press Stop/Exit to
stop the job. If more than one page has
been scanned, press Mono Start to send
the portion that is in the memory.