Echo 99944200545 User Manual

Page 17

Advertising
background image

99944200545

MAINTENANCE

X7702093804

17

© 08/2013 ECHO Inc.

2. Use one piece of new nylon line (C) 6 m (20 ft.) long and

thread through the molded loop (D) on the spool. Pull line
tight and adjust so one end is 15 cm (6 in.) longer than the
other.

3. Hold the spool, opening toward you. Place index finger

between the two strands and wind line, tightly and evenly, in
direction of arrow (E).

4. Place ends of line (C) into notches (F) in spool, leaving 6 in.

protruding.

5. Feed ends of line outward through eyelets (G) in drum.

6. Align grooves in spool with pegs (I), and push spool (B), into

drum.

7. Hold spool and drum securely with one hand, and pull each

line to disengage from notches.

8. Hold drum (A) and turn spool (B) counter clockwise until peg

clicks into hole.

9. Trim lines to 8 in. length.

D

C

E

B

F

F

I

B

H

G

G

Advertising