Starting warm engine, Stopping engine, Starting warm engine stopping engine – Echo PPT-280 Serial E08612005942 - E08612999999 User Manual

Page 21: Ppt-280 operation

Advertising
background image

PPT-280

OPERATION

X7702091009

21

© 02/2014 ECHO Inc.

Starting Warm Engine

The starting procedure is the same as Cold Start except DO
NOT close the choke, and do not depress throttle trigger to
wide open position.

The attachment should not move at idle, otherwise serious
personal injury may result.

Note: If attachment moves, readjust carburetor according to “Carburetor Adjustment” instructions in this

manual or see your ECHO Dealer.

1. Stop Switch

Move stop switch button (A) forward away from the STOP
position.

2. Purge Bulb

Pump purge bulb (C) until fuel is visible in the “Clear” fuel
return line.

3. Recoil Starter

Lay the unit on a flat area and keep movable attachment parts
clear of all obstacles. Rapidly pull the recoil starter handle (D)
until the engine fires.

Note: If engine does not start after 5 pulls, use Cold Start

Procedure.

Stopping Engine

1. Throttle

Release throttle and allow engine to return to idle before
shutting off engine.

2. Stop Switch

Move stop switch button (A) backward to STOP position.

If engine does not stop when stop switch is moved to STOP position, close choke - COLD START
position - to stall engine. Have your ECHO dealer repair stop switch before using unit again.

A

C

D

A

Advertising
This manual is related to the following products: