Cutting attachment to drive shaft installation, Ppt-280 assembly – Echo PPT-280 Serial E08612005942 - E08612999999 User Manual

Page 15

Advertising
background image

PPT-280

ASSEMBLY

X7702091009

15

© 02/2014 ECHO Inc.

5. Connect 2 ignition stop leads (C,D) from throttle cable

tubing to 2 ignition leads (C,D) on engine.

6. Gather ignition wires and position behind air filter case.

7. Install air filter and cover.

Cutting Attachment to Drive Shaft Installation

Saw Chain is sharp! Always wear gloves when handling assembly, otherwise serious personal injury
may result

1. Loosen the two (2) screws (A) and remove locator screw (B)

on cutting attachment.

2. Loosen clamp knob (E) turning counter clockwise.

C

D

A

B

F

E

Advertising
This manual is related to the following products: