Starting warm engine, Ppt-266/h operation – Echo PPT-266H User Manual

Page 23

Advertising
background image

PPT-266/H

OPERATION

X7702096005

23

© 08/2014 ECHO Inc.

6. Throttle Trigger

After engine warm-up, gradually depress throttle trigger to
increase engine RPM to operating speed.

Starting Warm Engine

The starting procedure is the same as Cold Start except DO
NOT close the choke, and do not depress throttle trigger to wide
open position.

The attachment should not move at idle, otherwise serious
personal injury may result.

Note: If attachment moves, readjust carburetor according to “Carburetor Adjustment” instructions in this

manual or see your ECHO Dealer.

1. Stop Switch

Move stop switch button (A) forward away from the STOP
position.

2. Purge Bulb

Pump purge bulb (C) until fuel is visible in the Clear fuel return
line. Pump bulb an additional 4 or 5 times

D

PPT-266H

A

PPT-266

A

PPT-266H

B

C

D

Advertising
This manual is related to the following products: