Appendix 1 drilling holes in the mount plate – Echo LS21160 Instruction v.7 User Manual
Page 8
Advertising

ECHO BEAR CAT
www.bearcatproducts.com
237 NW 12th Street, West Fargo, Nd 58078-0849
Phone: 701.282.5520 • Toll Free: 800.247.7335 • Fax: 701.282.9522
E-mail: [email protected] • [email protected]
3.25”
2.50”
1.25”
Ø .41 x .50
1.25”
APPENDIX 1
DRILLING HOLES IN THE MOUNT PLATE
If your log splittter does not have the two holes in the channel used to complete Step 1, use the dimensions below to
drill two .41" x .50" holes in the mount plate.
Advertising
This manual is related to the following products: