Echo WT24T Owners Manual - Manual (Page 20)

WHEELED TRIMMER
16
SERVICE & MAINTENANCE
BEFORE INSPECTING OR SERVICING ANY PART OF THIS MACHINE, SHUT OFF POWER SOURCE,
DISCONNECT SPARK PLUG WIRE FROM SPARK PLUG AND MAKE SURE ALL MOVING PARTS HAVE COME TO A COMPLETE STOP.
WARNING
1
2
3
4
4
5.9 WT24S TRANSMISSION BELT RE-
PLACEMENT
Figure 5.24, Transmission assembly removal
Figure 5.26
Figure 5.25
Figure 5.23
To replace transmission belt on WT24S:
1. Complete steps 1-5 from the previous Section 5.7.
However, it will be neccesary to completely remove
the 4" pulley to access the inner transmission belt.
2. Next, remove the four 5/16 x 5/8" screws (2) securing
the transmission assembly (1) to the trimmer body.
3. Slide transmission assembly out of the mounting lo-
cation.
4. Replace belt, (part #32124-00) and reverse the previ-
ous steps to reassemble machine.