Buffalo Technology Buffalo AirStation WLI-PCI-G54 - Manual (Page 11)

11
ẋ Click the Finish button to
complete the installation of
Client Manager. Restart your
computer.
Note: The 54Mbps Desktop
PCI Adapter and Client
Manager will not function prop-
erly until you reboot the system.
Depending on the operating system, some screens may vary. However, by accepting
default installation settings, Client Manager should install properly.
For more information about configuring and operating your 54Mbps Wireless
Desktop PCI Adapter and Client Manager, refer to the Buffalo Support Web Site:
http://www.buffalotech.com/wireless/support.
Ạ Open Client Manager and Click the
Survey button.
Click Refresh.
Select the Access Point to connect to.
Add WEP password if applicable.
Click Connect
ạ Client Manager has associated with the access
point
Close Client Manager.
Connecting with Client Manager
Note: Make sure your Access Point is operational prior running Client
Manager.