ACE BACKSTAGE Super Stage Pocket - Manual

ACE BACK STAGE CO., IN C.
CLEAR C OM DMX12 PUSH PUSH
Horizontal Slant
UL Listed
compliance
Standard
®
LISTED
UL Listed
Connectrix
System
Ready
“Connectrix”
ACE BACKSTAGE CO., INC.
STAGE POCKET SYSTEMS
24846 Avenue Rockefeller | Suite 200 | Valencia, CA 91355
Tel: 661-295-5760 | Fax: 661-295-1122
Email: [email protected] | Web: www.acebackstage.com
DATA SHEET
Stage Pocket
Data Spec Sheet
Revision: 1A.132-232
Model Numbers: #132-xxyy, #232-xxyy (xx= Lid Type and yy= Finish Type)
Model Name: Super Stage Pocket - Super Capacity Horizontal Panel Pocket
Model Description: Pocket with brushed metal or powder coat finish, choice of lid, with optional panel(s) and connectors
Model Name: SUPER STAGE POCKET
GENERAL DESCRIPTION
Ace Backstage Co. Inc.’s Super capacity Horizontal Panel
Pockets offer a rugged welded steel construction and du-
rable finishes with a detachable trim bezel-lid, horizontal
panel mounting brackets with included back boxes. Super
Pockets provide more than twice the capacity of our vertical
pockets in the same space.
The Super Pocket is the same size as the ACE Full Pocket
with Back Box except it provides almost 3 times the con-
nectivity capacity using a HORIZONTAL PANEL design.
The basic construction incorporates 3 sub-assemblies. A
unique Trim Bezel-Lid assembly with spring loaded blind
hinge pins and hinged cableway slot closure that mounts
directly to the ACE #102BBX Back Box. Assembled in the
Back Box is a set of panel mounting and AC barrier isola-
tion raceway brackets (#BRK102).
The Trim Bezel-Lid is a heavy duty welded 11 gauge (.120
thick) steel, solid brass or solid stainless steel assembly.
Each Bezel is available with either a flat flush standard lid
(SL) or a recessed carpet lid (CL). Steel Bezels with flush
flat lids come in 3 oven cured powder coat decorator fin-
ishes: antique silver vein, antique copper vein or textured
black. Solid Brass and Stainless Steel have a brushed fin-
ish and are available on a special order basis. The in-floor
appearance is the same as the Full Pocket.
The HORIZONTAL PANEL in the Super Pocket is designed
for high capacity connectivity. In less than one square foot
(10.5”x10.5”) the Super Pocket provides abundant panel
space for up to 25 connectors* and a barrier isolated race-
way ready for 2 duplex electric outlets (multiple circuits).
This large connectivity capacity is possible using a Hori-
zontal Panel Design and a set of panel mounting and A.C.
barrier isolation raceway brackets. Generous combination
conduit knockouts on four sides provides in-out-and-thru
ways for both low voltage and AC electric cabling.
The Super Pocket panel system is unique and flexible. Use
any combination of standard ACE pre-punched panels de-
signed for the Full and/or Half Pockets, or choose a custom
layout made to order aluminum “Connectrix” or alumi-lam
panel. Generous clearances above and below the panel(s)
permit easy termination and access to an array of audio,
video, data, communication and control connections
FEATURES
• EXTRA LARGE CAPACITY: The Super Stage Pocket
accomodates #PNL-100 Series Panels, #PSW-100 Series
Panels, #PNL-120 Series Panels, and #PNL-140 Series
Panels in an interchangeable multi-panel system making for
easy custom configurations. One (1) optional #PNL-140
Series Panel, four (4) optional #PNL-100 Series Panels or
two (2) optional #PNL-120 Series Panels will mount up
to 24 “CONNECTRIX”, Neutirk®, and/or Switchcraft® type
connectors*. Four (4) optional #PSW-100 Series Panels
will mount up to 24 Switchcraft® type connectors.
• DURABLE CONSTRUCTION: Welded steel construction
of Super Stage Pocket Lid, Mounting Flange, and Pocket
Body resist bending under even the most severe stage
loads. The Trim Bezel Lid and Mounting Flange is made
from 1/8” (nominally 11 ga. (.120”)) thick CRS steel while
the Back Box Pocket Body is made from 14 ga. (.071”)
thick CRS steel.
• SPRING LOADED HINGE PINS: Removable spring
loaded hinge pins permit easy exchange of lids for Carpet
Lid (CL), Locking Lid (LL), Standard Lid (SL) and other
custom application lids.
• CABLE WAY SLOTS: Generous 3/8” x 8” Cable Way Slots
permit easy cable exit from pocket(s), even for large gauge
cables. A Cable Way Slot Closure channel closes the slot
when not in use.
• EASY INSTALLATION: Easy installation into 10” x 10”
square cutout in stage floor. Open easy access from the
top of the stage pocket allows simple connector/panel
terminations.
• DECORATOR FINISHES: Scratch/wear resistant finish,
oven cured powder coat electro-static applied inside and
1 of 6
Ace Backstage Co., Inc. Stage Pocket Systems | 24846 Avenue Rockefeller | Suite 200 | Valencia, CA 91355 | Tel: 661-295-5760 | Fax: 661-295-1122 | Web: www.acebackstage.com