ADS-TEC ITC1013 - Manual (Page 17)

Tablet PCs ITC1013
© ads-tec GmbH • Raiffeisenstr.14 • 70771 Leinfelden-Echterdingen
17
5 I NTERFACES
5.1 20V DC POWER SUPPLY
T ECHNICAL DATA OF THE POWER ADAPTER
• Power consumption: Max. 70 Watts
• Input voltage: 100…240 V AC
• Mains frequency: 50…60Hz
• Current consumption: 3.5A (230V AC)
• Max. switch-on current: < 60A (230V AC)
Note:
The typical power consumption of this device is indicated in the "Technical details"
chapter.
5.2 14.4V DC B
ATTERY OPERATING MODE
The device is equipped with two batteries slots, by means of which the device can be
supplied with power, alternatively. It is provided with a hot swap function which allows you
to replace the batteries without rebooting.
The batteries are automatically charged in mains operation (20V DC).
Note:
If both batteries are to be replaced while operating the unit, power supply must be
ensured by attaching the supplied power adapter. If you want to replace just one battery,
you can do this without attaching an external power supply.