ADS-TEC OPC5017 - Manual (Page 6)

Industrial PCs OPC5017
6
© ads-tec GmbH • Raiffeisenstr.14 • 70771 Leinfelden-Echterdingen
1.5 C OPYRIGHT
This manual and any illustrations contained therein are copyrighted. Any use of this
manual which deviates from the copyright stipulations is prohibited. Reproduction,
translation and/or electronic and photographic archiving and modification require written
permission from ads-tec GmbH.
The violation of these rights will be prosecuted.
1.6 A
MBIENT CONDITIONS
The device can be operated in the following ambient conditions. The device warranty will
be rendered invalid upon noncompliance with these specifications. ads-tec shall not be
held responsible for damages resulting from improper handling.
• Temperature for devices with hard disk drives
during use 0 … 40 C
in storage -10 … 60 C
(due to temperature peak value memory inside)
• Temperature for devices with CompactFlash
during use 0 … 40 C
in storage -10 … 60 C
(due to temperature peak value memory inside)
• Humidity
during use 10 … 85% without condensation
in storage 10 … 85% without condensation
• Vibration
during use 1 G, 10 … 500 Hz
(DIN EN 60068-2-6)
• Bump
during use 5 G, at alternation of 30 ms
(DIN EN 60068-2-29)
1.7 S TANDARDS
The device meets the requirements and objectives of the following EC directives:
• The device complies with the test specifications for the CE label according to the
European test standards EN 55022 and EN 50082-2.
• The device complies with the test specifications DIN EN 60950 (VDE 0805, IEC
950) "Safety of Information Technology Equipment".
• The device complies with the DIN EN 60068-2-6 (sinusoidal vibration) test
specifications.
• The device complies with the DIN EN 60068-2-29 (bump) test specifications.