AiM MXL2 - Manual (Page 13)

RACESTUDIO3 SOFTWARE MXL2
24 25
Using the configuration bar you can
manage, for each LED the color and RPM
threshold value that will turn it on.
Pushing the pushbutton “Option” you can
decide:
To keep the LED ON if its threshold is
exceeded or to keep the LED ON only until
another LED is turned ON.
And if the LEDs are managed according to
the engaged gear number.
In this case, for each gear number you have
to define the levels at which to turn them
on.
Shift Lights Configuration
Alarms Configuration
When you click “Add new trigger” the
window shown in the above picture
appears. There you can define the event
the system has to check and the effect of
that event.
1) Fill the DESCRIPTION field, in order to
easily identify the event in the future.
2) Describe the Alarm: it can be a simple
event, like, for example:
“Water temperature is higher than 100 C”
or a combination of multiple events, like,
for example:
“Water temperature is higher than 100 C”
and “Engine RPM is higher than 6000”
You can add different check lines and
define the alarm as a combination of ALL
the events or just ONE of them.
3) Describe what to do when an alarm
arises: MXL2 can:
4) Turn a LED ON: You have to select the
color and the behaviour (fast/slow blinking
or continuous).
5) Show a TEXT MESSAGE that you have to
create and define.
6) Finally, you have to configure till when
the alarm has to remain in evidence.
There are some options:
n Until when the condition is no longer met
n Until when the device is turned OFF
n Until when a button is pushed
n Until when data is downloaded
Once the configuration is set, a summary
will appear: any time you need to change
settings, just click on the icon and proceed.
The icon at the left recalls the condition you
chose to turn the LED off.