AiM MXG - Manual (Page 13)

RACESTUDIO3 SOFTWARE MXG
24 25
Using the configuration bar you can
manage, for every LED, color and RPM
threshold value which will turn it on.
Pushing the pushbutton “Option” you can
decide if:
- To keep the LED ON if its threshold is
exceeded
- To keep the LED ON only till another LED
is turned ON
and if the LEDs are managed in depen-
dance upon the gear number.
In this case, per every gear number you
have to define the levels at which to turn
them on.
Shift Lights Configuration Alarms configuration
When you click “Add new alarm” the
window shown in the above picture
appears: here you can define the event the
system has to check and the effect of that
event.
1) Fill the DESCRIPTION field, in order to
easily identify the event in the future.
2) Describe the Alarm: it can be a simple
event, like, for example:
“water temperature is higher than 100 °C”
or a combination of multiple events, like,
for example:
“water temperature is higher than 100 °C”
“Engine RPM is higher than 6000”
You can add different check lines and
define the alarm as a combination of ALL
the events or just ONE of them.
3) Describe what to do when an alarm
arises. MXG can:
n Turn a LED ON: You have to select the
color and the behaviour (fast/slow blinking
or continuous).
n Show a TEXT MESSAGE that you have to
define.
Turn one of the two Digital Outputs ON