AiM G-Dash - Manual (Page 5)

How To install and Connect G-Dash to EVO4.
G-Dash must be connected via CAN bus to
your EVO4 (whose firmware version must
be 43.05.01 or newer), by plugging the
CAN cable into the logger “EXP” port.
CHAPTER 1 INSTALLATION AND CONNECTION
08 09
G-DASH
Speed 1-2
Beacon
ECU - CAN RS232
Exp. RPM K/L line
GPS Antenna Analog Input Channel
USB
EVO4 Status
1
CAN - Power Connection