AiM Channel Expansion - Manual (Page 5)

Channel Expansion
User Manual
Release 1.00
www.aim-sportline.com
2
Chapter 3 – Channel Expansion configuration
Channel Expansion must be configured using Race Studio2 software in order to be used.
Channel Expansion configuration is to be made in the way explained in Race Studio 2
Configuration user manual - “How to configure Channel Expansion” chapter.
4
3.1 – Display configuration
When channels to enable/disable are defined, it is possible to visualize them according to
the type of logger.
For more details, please refer to “How to configure MXL Strada/Pista/Pro/Pro05”, “ How
to configure AIM displays” (for all EVO loggers) chapters of Race Studio 2
Configuration user manual.
5
3.2 – Sensor Calibration
When configuration has been transmitted to the logger, it is necessary to do calibration of
sensors, connecting them to Channel Expansion.
For more details, please refer to “Calibration and Autocalibration of sensors” of Race
Studio Configuration user manual.