AiM Kit for SoloDL on BMW S 1000 RR - Manual (Page 9)

8
3.2
Connection of SoloDL and EVO4 to the bike ECU
To connect EVO4 and SoloDL to the ECU of the bike use the connector you find under the bike tail
shown below.
Open the bike tail.
Please note: if your bike has an anti-theft
alarm system unplug its connector, if not just
remove the connector cup. In the image here
on the right the connector has been
unplugged.
The image on the right shows the connector
in detail.
Connect AiM wiring to BMW wiring as
highlighted on the right.