3 – diagnostic mode – AiM Yamaha R6 User Manual

Page 18

Advertising
background image

MXL Plug&Play kit for Yamaha R1 2004/2005/2006 – R6 2004/2005/

User manual
Release 1.01

17

www.aim-sportline.com

5

4.3 – Diagnostic mode

It allows to monitor the behaviour of sensors and signals out coming from the ECU. It is
possible to switch from Running mode to diagnostic mode when the engine is off.
To enter Diagnostic Mode from Running Mode press first “MENU/<<” and “VIEW/QUIT” at
one time and then “MENU/<<” e “>>”.Diagnostic mode will show information concerning
different sensors in different pages. Use “MENU/<<” and “>>” to scroll through the pages.
The table here below shows the pages.

Page Description Shown

data

THROTTLE SENSOR

Master throttle angle

Valve open angle (from 0° to
125°).

ATMO PRESSURE

Atmospheric pressure Atmospheric pressure in Kpa.

INTAKE PRESSURE

Intake air pressure.

AirBox pressure in Kpa.

INTAKE TEMP

Intake air temperature. Intake air temperature in °C.

WATER TEMP

Water temperature

Water temperature in °C

VEHICLE SPEED

Vehicle speed. Shows
incremental number of
pulses read by the
sensor.

Reads pulses form 0 to 99.

OVERTURN SENSOR

Value read by the anti-
overturn sensor.

Voltage value*10 (from 0 to 50)

BATTERY VOLTAGE

Battery voltage

Battery voltage

SWITCH (STOCK BIKE)

Switch (stock)

1 = OFF (stock on)
0 = OFF (stock off)

SWITCH (YEC KIT)

Switch (ECU kit)

1 = ON
0 = OFF

SELECT SWITCH (STOCK
BIKE)

Neutral Switch

1 = Neutral
0 = Gear

SELECT SWITCH (YEC
KIT)

Map selection switch
(kit YEC)

1 = SB
0 = ST

IGNITION COIL 1

When engine-off switch is selected and de-selected the
engine off switch turns the coil on 5 times (shown value is
not important).

IGNITION COIL 2
IGNITION COIL 3
IGNITION COIL 4
INJECTOR 1

When engine-off switch is selected and de-selected the
engine off switch turns the injector on 5 times (shown value
is not important).

INJECTOR 2
INJECTOR 3
INJECTOR 4
AI SOLENOID (STOCK
only)

When engine-off switch is selected and de-selected the
engine off switch turns the AI Solenoid on 5 times.

MAIN RELAY

When engine-off switch is selected and de-selected the
engine off switch turns the main relay on 5 times (shown
value is not important).

FAN RELAY (STOCK only)

When engine-off switch is selected and de-selected the
engine off switch turns the fan relay on 5 times.

PROJECTOR RELAY

When engine-off switch is selected and de-selected the
engine off switch turns the projector relay on 5 times.

Advertising
This manual is related to the following products: