AirLive Air3G - Manual (Page 13)

1. Introduction
AirLive AIR3G User’s Manual
6
WDS Repeater in AP Mode
The WDS Repeater function in AP mode is to extend the wireless signal of remote AP.
Please see the diagram below for details:
For information on how to configuration WDS Repeater, please go to section 4.6 or section
6.3.
1.5 Hotspot Authentication
The Air3G features basic Hotspot Authentication function. Hotspot authentication enables
the administrator to manage Internet Access by username and password.
The hotspot
authentication function for Air3G is only suitable for small scale hotspot service like in the
coffee shop. For larger installation, it is recommended to use a dedicated hotspot gateway
like the AirLive WIAS-1200G.
For configuration procedures, please go to section 4.3.