Troubleshooting – AirLive Air4G User Manual
Page 74
Advertising
4. Troubleshooting
AirLive Air4G User’s Manual 69
4
4.
Troubleshooting
This Chapter provides solutions to problems for the installation and operation of theAir4G.
You can refer to the following if you are having problems.
1
Why can’t I configure the router even the cable is plugged and the LED is lit?
Do a Ping test to make sure that the WiFi Combo Router is responding.
Note:
It is recommended that you use an Ethernet connection to configure it.
Go to
Start > Run.
1.
Type
cmd.
2.
Press
OK.
3.
Type
ipconfig to get the IP of default gateway.
4.
Type “
ping 192.168.1.254”. Assure that you ping the correct IP Address
assigned to theAir4G. It will show four replies if you ping correctly.
Advertising