AirLive AirMax DUO - Manual (Page 102)

4. Wireless and WAN Settings
AirLive AirMax DUO User’s Manual 94
4.6.2 PPPoE Server Settings
Operation Mode -> Setup -> PPPoE Server Settings
Enable/Disable: Used to enable or disable PPPoE server.
Authentication: Choose to use “Local Account” or “Radius” as authentication
mechanism. If choosing “Local Account”, you have to configure “Local Account
Management”. If choosing “Radius”, you have to configure Radius server.
Local IP Address: Assign IP address to the interface of PPPoE server.
Remote Start/Remote End IP: Define IP address pool that is used to assign
address to the connected PPPoE clients.
MPPE Encryption: Used to enable or disable special MPPE encryption function.
Compression: Used to enable compression function.
Local Account Management
User Name: Specify authentication username.
Password: Specify authentication password.
Assign IP: Specify the IP address of PPPoE client. If 0.0.0.0 is specified, then
PPPoE client will get an IP address between remote start IP and remote end
IP.