AirLive AirMax DUO Lite - Manual (Page 174)

7. Command Line Interface
AirLive AirMax DUO Lite User’s Manual 166
Radio1 authentication type : wep !
set security <ssid> <wpa|wpa2> <tkip|aes|both> interval <0~300>
Purpose: to set the WPA or WPA2 security policy
Example:
Command> set security AirMax DUO Lite wpa2 tkip interval 300
Radio1 authentication type : wpa2 !
set security <ssid> <wpa-psk|wpa2-psk> <tkip|aes|both> interval
<0~300> <key string>
Purpose: to set the WPA-PSK or WPA2-PSK security policy
Example:
Command> set security AirMax DUO Lite wpa2-psk aes interval 300
12345678
Radio1 authentication type : wpa2-psk !
set antenna <diversity | vertical | horizontal >
Purpose: To set the antenna to use horizontal, vertical, diversity polarizations.
Example:
Command> set antenna horizontal
Antenna setting is Horizontal
set ratemode <full | half | quarter>
Purpose:
Example:
Command> set ratemode full
Rate mode is Full(20Mhz)
set noise immunity <on | off>
Purpose: To enable/disable the noise immunity level
Example:
Command> set noise immunity on
Noise immunity is enable