AirLive ARM-104 v3 - Manual (Page 123)

AirLive ARM-104_v3 ADSL2/2+ Router 117
4.5.5.1 Ping Test Procedure
1. Click Ping Test from the Tools menu to access the Ping Test screen.
2. Change or leave the default settings of the following fields:
„ Enter IP Address to ping
„ Packet size
„ Number of echo requests
3. Click Test.
4. The ping results will be displayed in the box on the screen. If the ping test was successful, it means that
the TCP/IP protocol is up and running. If the Ping test failed, the TCP/IP protocol is not loaded for some
reason, you should restart the ARM-104_v3 ADSL2/2+ Router.