AirLive IGR-1500 - Manual (Page 28)

„ Static Routing – Basic NAT Mode
Similar to Gateway mode, the difference is that Basic NAT mode only has Basic NAT function. Once you
select Basic NAT mode, all the additional function such as DoD (Dial on Demand), IP Filter, DoS and so on will
be disabled. You may select Basic NAT mode to obtain higher speed otherwise you have to select Gateway
mode to enable these functions.
„ Dynamic Routing
Dynamic Routing allows router learning the path to destination by receiving periodic updates from others. The
protocol used in communication between routers is RIP v1 and v2. (Routing Information Protocol). RIP1
supports only to broadcast mode while RIP2 supports broadcast and multicast mode. (Figure 3-15)
Figure 3-15 Static Routing and Dynamic Routing
25