AirLive IP-2000VPN - Manual (Page 141)

9.3 Connection Status – Telstra Big Pond
Data – Telstra Big Pond Screen
Connection
Physical Address The hardware address of this device, as seen by remote devices. (This is
different to the hardware address seen by devices on the local LAN.)
IP Address The IP Address of this device, as seen by Internet users. This address is
allocated by your ISP (Internet Service Provider).
Connection Status This indicates whether or not the connection is currently established.
• If the connection does not exist, the "Connect" button can be used to
establish a connection.
• If the connection currently exists, the "Disconnect" button can be used to
break the connection.
• Normally, it is not necessary to use the Connect and Disconnect buttons
unless the setting "Connect automatically, as required" is disabled.
Connection Log
Connection Log
• The Connection Log shows status messages relating to the existing
connection.
• The Clear Log button will restart the Log, while the Refresh button will
update the messages shown on screen.
Buttons
Connect If not connected, establish a connection to Telstra Big Pond.
AirLive IP-2000VPN User’s Manual 138