AirLive Live-800G - Manual (Page 2)

1 1
Gigabit Ethernret Switch
Live-800G English
English
Port Layout
Power Connector
Station Ports
(10/100/1000Mbps)
Installation Steps
1 1 . . Remove the switch and accessories from the package
2 2 . . Connect power to the switch, make sure “Power” LED is on.
3 3 . . Connect devices to the switch:
ˆ ˆ Connect PCs, router, print servers, AP, or other network devices to the
station ports.
ˆ ˆ Connect Server with Gigabit card or another Gigabit switch to the
Station Port
ˆ ˆ Use Cat.5E Ethernet cable(4 full pair) or better.
ˆ ˆ Check whether the “Link/Act” light is on. If not, please make sure the
other device or the PC’s power is on
ˆ ˆ Please do not form a network loop, refer to the “Connectivity Rules”
section for details.
ˆ ˆ The maximum cabling distance is 100 meter
4 4 . . Please refer to the user’s manual in the CD for detail instructions.
The switch features Auto-MDI/MDI-X function. It allows users to
use straight-thru cable for all type of connections.
The switch can auto-detect between 100 and 1000Mbps
connection.