AirLive OD-325HD - Manual (Page 35)

5. Administrating the Device
AirLive OD-325HD User’s Manual 31
PTZ Setting
Camera Protocol:
This device can connect to a PTZ camera or speed dome camera and controls them thru
RS485 interface.
Camera Address:
This is the camera ID set in PTZ camera or speed dome camera. Note that please DO NOT
change the default value if unnecessary. If so, user needs to check and set value properly
for both sides.
Baud rate:
This is the communication speed between network module and P/T scanner.
Note If need to change these parameters, user needs to check and set value properly for
both, network module and P/T scanner.