AirLive P-201U - Manual (Page 93)

9.5 Other Commands
9.5.1 ipconfig
“ipconfig” command is used to quickly get the IP settings (IP, subnet mask,
default gateway) of the print server:
admin# ipconfig
IP_ADDR=192.168.2.2
SUBNET_MASK=255.255.255.0
DEFAULT_GATEWAY=192.168.2.254
9.5.2 reboot
“reboot” command is used to restart the print server:
admin# reboot
9.5.3 exit
“exit” command is used to leave the print server telnet management:
admin# exit
9.5.4 help
“help” command is used to list all telnet management commands of the
print server:
admin# help
set argument value
88