AirLive P-201U - Manual (Page 40)

8. Press the Insert key to add a new NetWare print server object. The
print server name can be identical to the PSxxxxxx name printed on the label of
the print server.
9. Press Enter to select the newly created print server.
10. Select Print Server Configuration.
11. Select Printer Configuration.
12. Select Printer 0 (or Printer 1, Printer 2), and press Enter, then select
LPT1 (or LPT2, LPT3) in the Type field. If your print server is with only one
port, you do not need to configure this Type field.
13. Press Escape, and answer Yes to the Save Changes question.
35