AirLive POE-GSH2004L-370 - Manual (Page 13)

2. Installation of the Switch
2.2 Hardware Overview
2.2.1 Front Panel
The front panel of the web smart switch consists of 24 10/100/1000M Base-TX RJ-45 ports
and 4 100/1000M Combo SFP ports. The LED Indicators are also located on the front
panel.
 LED Indicators:
Comprehensive LED indicators display the status of the switch and the network (see the
LED Indicators chapter below).
 1000BASE-T Gigabit Ethernet Ports (Port 1~24)
The Switch four Gigabit twisted pair ports, supported auto negotiable 10/100/1000Mbps
and auto MDI/MDIX crossover detection function, this function gives true “plug and play”
capability, just need to plug-in the network cable to the hub directly and don’t care if the end
node is NIC (Network Interface Card) or switch and hub. These ports can operate in
half-duplex mode for 10/100Mbps and full- duplex mode for 10/100/1000Mbps.
24 10/100/1000Mbps RJ-45 ports are PoE enable ports. These PoE ports will be
automatically activated when a compatible terminal is identified, and the PoE port will
supply power to the connected PoE device.
AirLive POE-GSH2004L-370 User’s Manual
8