Incoming, Enter incoming window – AirLive RS-2000 User Manual
Page 180
１７９
Incoming
This chapter describes steps to create policies for packets and services from the WAN
network to the LAN network including Mapped IP and Virtual Server.
Enter Incoming window
Step 1: Click Incoming under the Policy menu to enter the Incoming window. The
Incoming table will display current defined policies from the WAN network to
assigned Mapped IP or Virtual Server.
Step 2: The fields of the Incoming window are:
!
Source: source networks which are specified in the WAN section of the Address
menu, or all the WAN network addresses.
!
Destination: destination networks, which are IP Mapping addresses or Virtual server
network addresses created in Virtual Server menu.
!
Service: services supported by Virtual Servers (or Mapped IP).