Edit / delete a vlan group – AirLive SNMP-FSH2602MG User Manual

Page 81

Advertising

AirLive SNMP-FSH2602MG User’s Manual

NOTE: If the trunk groups exist, you can see it (ex: TRK1, TRK2…) after port 26, and
you can configure it is the member of the VLAN or not.

Edit / Delete a VLAN Group

In this page, user can edit or delete a VLAN group.

Press <Edit> or <Delete> item.

Choose the VLAN group that you want to edit or delete and then press enter.

User can modify the protocol VLAN item and the member ports are tagged or
un-tagged and remove some member ports from this VLAN group.

After edit VLAN, press <Save> key to save all configures value.

Advertising