AirLive Traveler3G - Manual (Page 102)

6. General Setup
AirLive Traveler 3G User’s Manual 100
on to add the public IP address and associated
P address mapping will be
click “Delete Selected”
button. (You can select more than one DMZ entries).
Delete All
If you want to delete all DMZ entries listed here, please click “Delete
All” button.
Reset
You can also click “Reset” button to unselect all DMZ entries.
After you finish with all settings, please click “Apply” button and the following message will
be displayed on your web browser:
dd Click “Add” butt A
private IP address to the DMZ table.
Reset
Click “Clear” to remove the value you inputted in Public IP address
and Client PC IP address field.
Current
All existing public IP address and private I
MZ table displayed here. D
Delete
If you want to delete a specific DMZ entry, check the “select” box of
the DMZ entry you want to delete, then
Please click “Continue” to back to previous setup menu; to continue on other setup
procedures, or click “Apply” to reboot the router so the settings will take effect (Please wait
r about 60 seconds while router is rebooting). fo
If you want to reset all settings in this page back to previously-saved value, please click
“Cancel” button.