AirLive VoIP-120A User Manual

Page 29

Advertising
background image


3.10.7

DTMF Setting: you can setup the RFC2833 Out-Band DTMF, Inband DTMF and Send DTMF
SIP Info in this page. To change this setting, please following your ISP information. When
you have finished the setting, please click the Submit button. If no further changes are
needed, please click the Save Change Item on the left side; then click the Save button. The
changes you have made will be saved and the system will reboot automatically.

Figure 24. DTMF Setting


3.10.8

RPort Function: you can setup the RPort Enable/Disable in this page. To change this
setting, please following your ISP information. When you have finished the setting, please
click the Submit button. If no further changes are needed, please click the Save Change
Item on the left side; then click the Save button. The changes you have made will be saved
and the system will reboot automatically.

Figure 25. RPort Setting


3.10.9

Other Settings: you can setup the Hold by RFC, Voice/SIP QoS and SIP expire time in this
page. To change these settings please following your ISP information. When you have
finished the setting, please click the Submit button. The QoS setting is to set the voice

25

AirLive VoIP-111A / 120A User’s Manual

Advertising
This manual is related to the following products: