AirLive WH-9200AP - Manual (Page 9)

1.2.3 Configuration Setups
The factory default settings of WH-9200AP are as following:
Default Value Settings
Wireless1 Wireless2
Device Name WH-9200AP
Radio 802.11a 802.11b/g
SSID airlive1 airlive2
IP Address 192.168.1.1
DHCP Server Disabled. Available and default enabled when each of
the wireless is configured as a gateway.
DHCP IP Range 192.168.1.2 ~ 192.168.1.254
Access Password airlive
1. Connect to your local area network: connect an Ethernet cable to one of the Ethernet
port.
2. (LAN1, LAN2) of this Wireless Access Point, and the other end to a hub, switch, router,
or another wireless access point.
3. Power on the device: connect the included AC power adapter to the Wireless Access
Point’s power port and the other end to a wall outlet.
7 AirLive WH-9200AP User’s Manual